Advertisement
Quick Links
Advertisement
Related Manuals for Hybrid HMH GOBO
Summary of Contents for Hybrid HMH GOBO
- Page 1 User Manual Please read the instructions carefully before use...
- Page 2 TABLE OF CONTENTS 1. Safety Instructions..................... 2 2. Technical Specifications...................3 3. How To Control The Unit..................4 4. How to use the remote controller................8 5. Trouble shooting......................9 statement product well capability intact packing when leave factory. All of the user should comply with warning item and manual, any misuse cause of the damages are not included guarantee,...
- Page 5 The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be sure that no ventilation slots are blocked. Disconnect main power before replacement or servicing. Make sure there are no flammable materials close to the unit while operating as it is fire hazard.
- Page 6 Power Voltage: 220-240 Vac / 50-60 Hz Packing Dimension: 30*21*26.5cm Gross Weight: 2.95Kgs Control DMX Channel: 10CH Control Modes: DMX Pan/Tilt Pan/Tilt: 540°/ 270° Pan/Tilt Resolution: 8bit Construction Display: LED Display Data In/Out socket: 3-pin XLR sockets Protection Rating: IP20 3.
- Page 7 B. Not responding to DMX controller 1. DMX LED should be on. If not, check DMX connectors, cables to see if link properly. 2. If the DMX LED is on and no response to the channel, check the address settings and DMX polarity. 3.
- Page 8 gobo 4 40----49 gobo 5 50----59 gobo 6 60----69 gobo 7 70----79 gobo 7 shake 80----89 gobo 6 shake 90----99 gobo 5 shake 100----109 gobo 4 shake 110----119 gobo 3 shake 120----129 gobo 2 shake 130----139 gobo 1 shake 140----149 gobo changing from slow to fast 150----255 no function...
- Page 9 MENU To select the programming functions DOWN To go backward in the selected functions To go forward in the selected functions ENTER To confirm the selected functions Set DMX Address Code Press "Menu" to "Set DMX Address",and press"ENTER" keys to enter into Show "Set DMX Address DMX Address:001",Press the "UP and DOWN"...
- Page 10 lighting will send DMX signal outside automatically StUn Sound controlled mode. After entering this mode, the lighting will send DMX signal outside automatically Pan forward rPAn pan reverse Tilt forward rtiL Tilt reverse LCD display show in positive side rdiS LCD display show in obverse side rESt Menu reset...
- Page 11 DMX channel´s functions and values: CH 1： 0----255 CH 2： Pan Fine pan fine 0----255 CH 3： Tilt tilt 0----255 CH 4： tilt fine tilt fine 0----255 Pan/Tilt CH 5： Motor speed from fast to slow 0----255 speed CH 6： dimming from dark to brightness 0----255 no function...