TABLE OF CONTENTS 1. Safety Instructions 2. Technical Specifications 3. Installation 4. How to set the unit 5. How to control the fixture 6. DMX512 Configuration 7. DMX512 Connections 8. Trouble shooting 9. Fixture Cleaning...
Page 3
1. Safety Introductions Please read the instructions carefully which includes important information about the installation, operation and maintenance. WARNING Please keep this User Manual for future consultation. If you sell the fixture to another user, be sure that they also receive this instruction booklet. Unpack and check carefully there is no transportation damage before using the fixture....
Caution There are no user serviceable parts inside the fixture. Do not open the housing or attempt any repairs yourself. In the unlikely situation, your unit may require service, please contact your nearest dealer. 2. Technical Specifications 11 and 13 DMX channels ●...
Page 5
4.1 Main Function Chart Display Value Noted DmxAddr DMX address select 001- 512 DMX512 DMX Mode WorkMod Auto Mode AUTO SOUND Sound Mode Master Mode Master MS Mode Slave Slave Mode 11channels Mode 11Ch ChanMod 13 channels Mode 13Ch Control Manual control Mode CH01-CH45 LCD Display ON...
Page 6
4.1 Address Setting If you use a universal DMX controller to control the units, you have to set the DMX address from 1 to 512 so that the units can receive DMX signal. Press the MENU button to enter menu mode, select DMX Functions. Press the ENTER button to confirm, use the UP/DOWN button to select DMX Address.
5. DMX512 Configuration Value Function 11CH 13CH 0-255 0-255 Pan fine 0-255 Tilt Tilt fine 0-255 0-255 Pan/Tilt speed from fast to slow Reserved Mater Dimmer 5-255 0-19 Shutter Closed 20 -49 Shutter Open 50 - 64 Strobe-effect from fast to slow 65-69 Shutter Open 70 - 84...
Page 8
0 -127 Continual positioning 128 -130 Colour half Color 1 131 -133 Colour half 134 -136 Color 2 137 -139 Colour half 140 -142 Color 3 143 -145 146 -148 Colour half Color 4 149 -151 152 -154 Colour half 155 -157 Color 5 158 -160...
6. DMX512 Connections The DMX512 is widely used in intelligent lighting control, with a maximum of 512 channels. 1. If you using a controller with 5 pins DMX output, you need to use a 5 to 3 pin adapter-cable. 2. Connect the fixture together in a “daisy chain” by XLR plug cable from the output of the fixture to the input of the next fixture.
Not responding to DMX controller 1. DMX LED should be on. If not, check DMX connectors, cables to see if link properly. 2. If the DMX LED is on and no response to the channel, check the address settings and DMX polarity.