Intermec IV6 Quick Start Manual page 13

IV6 Reader Configuration Default Settings
Parameter Default
Bluetooth Name IV6-XXXX
Authentication Disabled
PinCode 1234
Encryption Disabled
Config Timer 60
If these parameter settings are acceptable you do not need to use
the IV6 Configuration Utility. If you need to change one of
these parameters you need to use the IV6 Configuration Utility
to make that change.
The Configuration Utility is available at www.intermec.com.
To download the Configuration Utility:
1 Under Service & Support click on "Downloads".
2 Select a Product drop down box to display products.
3 Scroll down to "RFID: IV6 Mobile RFID Reader" and click
on it.
4 Click the link for "RFID IF6/IV6 Configuration Utility".
The utility runs on Windows 98 or greater and you need to
have Microsoft Windows.net framework installed on your PC to
run the utility. The .net framework can be loaded using Win-
dows Update. The Configuration Utility works with either
Bluetooth serial adapters or Bluetooth USB adapters. If you are
using an Intermec CV60 Vehicle Mount Computer it has an
internal USB adapter.
The Configuration Utility configures both the IF6 and IV6
Readers. So after starting the Configuration Utility select the
IV6 tab and follow the instructions. When you have made the
changes click the Apply button. If there no more changes to
make, click on the Exit Bluetooth Config Mode button and
close the Configuration Utility.
Now you should be able to use the Intermec IDK applications
or your own RFID application to read RFID tags.
IV6 Portable Reader
Description
XXXX= Bluetooth Address least significant
digits
Seconds
13