Visual Operations - Clarion VRX 835 VRX835 VRX835 Owners & Installation Manual

VISUAL Operations

This function is available when a VTR, etc. is
connected to the visual 1 or visual 2 terminal.
∗ The visual 1 mode is not available when a DVD
changer is connected to the visual 1.
WARNING
For your safety, the driver should not watch
the VTR, etc. or operate the controls while
driving. Please note that watching and op-
erating the VTR, etc. while driving are pro-
hibited by law in some countries.
Switching to the VISUAL mode
Note:
• For your safety, the VRX835 has a safety function
which turns off the picture when the car is mov-
ing, so only the audio can be heard. The picture
can only be watched when the car is stopped and
the parking break is applied.
1. Press the [FUNC] buton and select the VI-
SUAL mode.
2. Press the [BAND] button to select the VI-
SUAL1 or VISUAL2.
Switching the VTR system between
NTSC and PAL
∗ This function is enabled only when the panel is
open.
Switch to the VTR/DVD video/DVD changer
mode you use.
1. Press the [ADJ] button to switch to the ad-
justment selection display.
2. Touch the [z] key to select "VTR N/P".
Touch the [VTR N/P] key, [NTSC] key and
[PAL] key appears in the display.
3. Touch the [NTSC] key or [PAL] key to select
"NTSC" or "PAL".
Adjusting the brightness and tone of color
Notes:
• This operation is available only when the car is
stopped and the parking brake is applied.
• This function is not available when the display is
stored.
• The HUE setting can be adjusted only when the
NTSC mode is selected.
• Switch to the VTR/TV/DVD video/DVD changer
mode you see.
1. Press the [ADJ] button to switch to the ad-
justment selection display.
2. Touch the [MONI ADJ] key to display
[BRIGHT], [HUE] and [COLOR] key. Touch
the [BRIGHT], [HUE] and [COLOR] key to
adjust BRIGHT, HUE and COLOR.
24
VRX835
G "BRIGHT":
Adjust the brightness of the display.
G "HUE":
Adjust the tone of color (red is emphasized
or green is emphasized)
G "COLOR":
Adjust the color saturation.
3. Operate the touch key to adjust a level.
G "BRIGHT":
[–] key or [+] key
G "HUE":
[R] key or [G] key
G "COLOR":
[–] key or [+] key
4. When adjustment is made, touch the [RTN]
key to return to the ADJ MENU display.
Touch the [RTN] key again to return to the
STANDARD display.
∗ To return from the adjust a level display to the
STANDARD display, press the [ADJ] button
once again.
Changing over monitor display size
∗ This function is available only when the panel is
open.
Notes:
• This function is not available while you are driv-
ing.
• Switch to the VTR/TV/DVD video/DVD changer
mode you see.
1. Press the [DISP] button to change over the
monitor display size. Each time you press
the [DISP] button, the monitor display size
changes in the following order:
"NORMAL" ➜ "WIDE" ➜ "F. WIDE" ➜
"CINEMA" ➜ "NORMAL"
G "NORMAL": (normal display)
There is a black area at both right and left
ends of a display. In case of normal TV
broadcasting (4:3), the image can be shown
without being cut or deformed.
G "WIDE": (wide mode)
The image at right and left ends in a display
elongates horizontally.
G "F. WIDE": (full wide mode)
The whole image elongates horizontally.
G "CINEMA": (cinema mode)
The image at both top and bottom in a dis-
play disappears.