Visual Operations; Vrx935Vd - Clarion ProAudio VRX 935VD VRX935VD VRX935VD Owners & Installation Manual

VISUAL Operations

This function is available when a VTR, etc. is
connected to the visual 1 or visual 2 terminal.
∗ The visual 1 mode is not available when a DVD
changer is connected to the visual 1.
WARNING
For your safety, the driver should not
watch the VTR, etc. or operate the controls
while driving. Please note that watching
and operating the VTR, etc. while driving
are prohibited by law in some countries.
Switching to the VISUAL mode
Note:
• For your safety, the VRX935VD has a safety
function which turns off the picture when the car
is moving, so only the audio can be heard. The
picture can only be watched when the car is
stopped and the parking break is applied.
1. Press the [FUNC] buton and select the
VISUAL mode.
2. Press the [BND] button to select the
VISUAL1 or VISUAL2.
Switching the VTR system between
NTSC and PAL
∗ This function is enabled only when the panel is
open.
Switch to the VISUAL/VTR in TV mode you use.
1. Press the [ADJ] button to switch to the
ADJUST MODE menu.
2. Touch the [NTSC/PAL] key, [NTSC] key and
[PAL] key appears in the display.
3. Touch the [NTSC] key or [PAL] key to select
"NTSC" or "PAL".
Adjusting the brightness and tone
of color
Notes:
• This function is not available when the display is
stored.
• The HUE setting can be adjusted only when the
NTSC mode is selected.
• Switch to the VISUAL/DVD player(DVD video or
video CD)/DVD changer/TV mode you see.
1. Press the [ADJ] button to switch to the
ADJUST MODE menu.
2. Touch the [MONI ADJ] key to display
[BRIGHT], [HUE] and [COLOR] key. Touch
the [BRIGHT], [HUE] and [COLOR] key to
adjust BRIGHT, HUE and COLOR.
G "BRIGHT":
Adjust the brightness of the display.
G "HUE":
Adjust the tone of color (red is emphasized
or green is emphasized)
• This operation is available only when the car
is stopped and the parking brake is applied.
G "COLOR":
Adjust the color saturation.
• This operation is available only when the car
is stopped and the parking brake is applied.
3. Operate the touch key to adjust a level.
G "BRIGHT":
[–] key or [+] key
G "HUE":
[R] key or [G] key
G "COLOR":
[–] key or [+] key
4. When adjustment is made, touch the [RTN]
key to return to the ADJUST MODE menu.
Touch the [RTN] key again to return to the
STANDARD screen.
∗ To return from the adjust a level display to the
STANDARD screen, press the [ADJ] button
once again.
43

VRX935VD