Cd/Md Changer Operations - Clarion VRX 835 VRX835 VRX835 Owners & Installation Manual

VISUAL Operations
Notes:
• When a normal 4:3 size image, not being a wide
one, is viewed by displaying it fully on a wide moni-
tor display in a wide mode or a full-wide mode, a
part of the peripheral image will be lacking or de-
formed. In deference to the intention of producer,
an original image can be viewed in a normal mode.
• During superimposed display, it becomes a full-
wide mode.
• In the DVD changer, when the monitor display
size is set in the CINEMA mode, a part of
playback display such as play time may not be
shown depending on the play disc.
In this case, change the monitor display size to a
mode other than the CINEMA mode.
Monitoring the CCD camera
The CCD camera can be connected to this unit.
For the power supply of the camera, mount the
power box sold separately (CAA-188).
Note:
• This function is not available when the display is
stored.
Switching to the Composite Screen
∗ The composite Screen is the image of device
connected to the CCD/M.LOCK terminal.
∗ This function is available when a navigation system,
etc. is connected to the CCD/M.LOCK terminal.
∗ This function is not available when a CCD camera
is connected to the CCD/M.LOCK terminal.
1. When the panel is open, press the [M.LOCK]
button to switch to the composite screen. At
this time, the sound from the vehicle
speakers can be heard on the mode selected
using the [FUNC] button.
2. When the panel is open and the composite
screen is shown, press the [M.LOCK] button
again to return to the previous screen.
Switching CONNECT(connect)
∗ This function is available when a CCD,etc. is con-
nected to the CCD/M.LOCK terminal.
∗ When a navigation system is connected, set this
mode to "NAVI".
When an external device other than a navigation
system, set this mode to "OTHERS".
∗ The factory default setting is "OTHERS".
1. When the panel is open, press the [ADJ] but-
ton to display the ADJUST MODE menu.
2. Touch the [z] key two times to select "CON-
NECT".
Touch the [CONNECT] key to select "NAVI"
or "OTHERS".
3. Press the [ADJ] button again or touch the
[RTN] key, the unit returns to the previous
mode.
CD/MD Changer
Operations
CD/MD changer functions
When an optional CD (MD) changer is con-
nected through the CeNET cable, this unit con-
trols all CD (MD) changer functions. This unit
can control a total of 2 changers (MD and/or
CD).
Press the [FUNC] button and select the CD
changer mode to start play. If 2 CD (MD) chang-
ers are connected, press the [FUNC] button to
select the CD (MD) changer for play.
∗ If "NO MAG" appears in the display, insert the
magazine into the CD changer. "LOADING" ap-
pears in the display while the player loads
(checks) the magazine.
∗ If "NO DISC" appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
∗ If "NO DISC" appears in the display, load MDs
into the MD changer.
CAUTION
CD-ROM discs cannot be played in the CD
changer.
Pausing play
s s
s s ] button for 1 second or
1. Press the [s
longer to pause play. "PAUSE" appears in the
display.
2. To resume play, press the [s
second or longer again.
∗ The same operation is also available using the
[s] key in the menu screen while in the CD/
MD changer mode.
∗ When the panel is open, the same operation
is also available by using the [s] button in
the panel.
Displaying CD titles (CD)
This operation is only possible when this unit is
connected with a CD-text compatible CD
changer. When a title is longer than 10 charac-
ters, the same operation can be performed on a
CD.
s s ] button for 1 s
s
25
VRX835