Basic Operations
Turning the liquid crystal panel
horizontal (Air conditioner
operation mode)
When the way the liquid crystal panel is
mounted hinders the operation of the air condi-
tioner, the position of the panel can be turned
horizontal temporarily.
1. Press and hold the [OPEN] button when the
liquid crystal panel is upright, and release
the button when a beep is heard.
2. The liquid crystal panel turns horizontal.
∗ Press the [OPEN] button again when the liquid
crystal panel is in the horizontal position, and
the panel returns to the original position.
∗ Even if the button is not operated for about 10
seconds, the panel returns to the original
position with a warning sound.
Turning on and off the monitor
Pressing and holding the [DISP] button for 1
second or longer turns the monitor off. To return
to the monitor on, press the [DISP] button once
again.
∗ When a button is pressed or during security moni-
toring, the monitor-off mode is canceled.
Mute
Each time you press the [s] button, mute is
turned on and off.
"MUTE" appears when mute is turned on.
Setting the Z-enhancer
This unit comes with 3 types of sound tone effect
stored in memory. Select the one you prefer.
∗ The factory default setting is "Z-EHCR OFF".
When a Z-enhancer comes on (1-3), "Z-EHCR"
appears in the display.
• "Z-EHCR 1" (Z-Enhancer 1):
Setting emphasizing bass.
• "Z-EHCR 2" (Z-Enhancer 2):
Setting emphasizing treble.
• "Z-EHCR 3" (Z-Enhancer 3):
Setting emphasizing bass and
treble.
• "Z-EHCR OFF" (Z-Enhancer off):
Neither bass nor treble are em-
phasized by the Z-enhancer.
Note:
• Incapable of operation when connecting DSP
(DPH910) and DVD player (DVS9755z).
18
VRX835
When the panel is closed:
Each time you press the [Z-EHCR] button of the
remote control unit, the tone effect changes in
the following order:
"Z-EHCR 1" ➜ "Z-EHCR 2" ➜ "Z-EHCR 3" ➜
"Z-EHCR OFF" ➜ "Z-EHCR 1"...
Note:
• When the panel is closed, operations can only be
made through the remote control unit.
When the panel is open:
1. Press the [A-M] button to change into the
AUDIO-MODE display.
2. Touch the [Z-ENHANCER] key when the AU-
DIO-MODE screen is being displayed to show
the Z-ENHANCER type selection screen.
3. When the Z-ENHANCER type selection
screen is displayed, touch the key for the de-
sirable type to select it.
• "TYPE 1" (Z-Enhancer 1)
• "TYPE 2" (Z-Enhancer 2)
• "TYPE 3" (Z-Enhancer 3)
• "OFF" (Z-Enhancer off)
4. When the setting is finished, touch the [RTN]
key to return to the AUDIO-MODE screen.
Touch the [RTN] key on the AUDIO-MODE
screen to return to the STANDARD display.
∗ To return from the Z-ENHANCER type
selection display to the STANDARD display,
press the [A-M] button once again.
Adjusting the Z-enhancer
Notes:
• The Z-enhancer cannot be adjusted when it is
turned off.
• This function is enabled only when the panel is open .
1. Press the [A-M] button to change into the
AUDIO-MODE display.
2. Touch the [Z-EHCR LV] key when the AUDIO-
MODE screen is being displayed to show the
Z-ENHANCER level adjustment screen.
3. Touch the [w] or [z] key to adjust to the de-
sirable level.
∗ When type 1 is selected, you can adjust the
bass in the range of ±2.
∗ When type 2 is selected, you can adjust the
treble in the range of ±2.
∗ When type 3 is selected, you can adjust the
bass and treble in the range of ±2.
4. When adjustment is finished, touch the [RTN]
key on the Z-ENHANCER level adjustment