Clarion VRX 835 VRX835 VRX835 Owners & Installation Manual page 15

Basic Operations
screen to return to the AUDIO-MODE screen.
Touch the [RTN] key on the AUDIO-MODE
screen to return to the STANDARD display.
∗ To return from the Z-Enhancer level mode
display to the STANDARD display, press the
[A-M] button once again.
Adjusting the bass and treble
Notes:
• This function is enabled only when the panel is open .
• This function can be adjusted only when the Z-
enhancer is OFF.
1. Press the [A-M] button to change into the
AUDIO-MODE display.
2. Touch the [BAS/TREB] key when the AUDIO-
MODE screen is being displayed to show the
BASS/TREBLE LEVEL adjustment screen.
3. Touch the [w] or [z] key to adjust to the
desirable BASS/TREBLE level (adjustment
range: from -6 to 6).
4. When adjustment is finished, touch the [RTN]
key on the BASS/TREBLE LEVEL adjustment
screen to return to the AUDIO-MODE screen.
Touch the [RTN] key on the AUDIO-MODE
screen to return to the STANDARD display.
∗ To return from the BASS/TREBLE LEVEL
mode display to the STANDARD display, press
the [A-M] button once again.
Adjusting the balance and fader
Note:
• This function is enabled only when the panel is open.
1. Press the [A-M] button to change into the
AUDIO-MODE display.
2. Touch the [BAL/FAD] key when the AUDIO-
MODE screen is being displayed to show the
BALANCE/FADER adjustment screen.
3. Touch the [Î] or [Å] key to adjust to the de-
sirable balance.
Adjusting range of the balance: left 13 to right 13
4. Touch the [w] or [z] key to adjust to the de-
sirable fader.
Adjusting range of the fader: front 12 / rear 12
5. When adjustment is finished, touch the [RTN]
key on the BALANCE/FADER adjustment
screen to return to the AUDIO-MODE screen.
Touch the [RTN] key on the AUDIO-MODE
screen to return to the STANDARD display.
∗ To return from the BALANCE/FADER mode
display to the STANDARD display, press the
[A-M] button once again.
Turning on/off the loudness
The loudness effect emphasizes the bass and
treble to create a natural sound tone. When you
are listening to music at a low volume, it is rec-
ommended to use the loudness effect.
∗ This function is enabled only when the panel is open.
1. Press the [A-M] button for 1 second or longer
to select Loudness ON. The "LD" indicator
lights in the display.
2. Press the [A-M] button for 1 second or longer
to select Loudness OFF. The "LD" indicator
goes off.
Note:
• When using a sold separately digital sound pro-
cessor (DPH910) or DVD player (DVS9755z), a
feature called auto loudness is selected. This
function is different from the loudness effect. For
further details on the auto loudness feature, refer
to the subsection "Output adjustment of auto
loudness, subwoofer and playback band".
Changing the setting of the display
background
WARNING
Perform the setting of this function the car
is stopped with the parking break applied.
1. Press the [DISP] button to show the back-
ground setup menu.
2. Touch the setting key to show the setup dis-
play.
GTo set up the pattern and colour of the wall
paper
2-1. Touch the [WALL PAPER] key to select
"PATTERN" or "COLOR".
2-2. Touch the [PATTERN] or [COLOR] key
to set a desired pattern or colour.
2-3. Touch a desired [PATTERN] or
[COLOR] key.
GTo set up the motion pattern
2-1. Touch the [MOTION PATTERN] key to
set a desired motion pattern.
2-2. Touch a desired [MOTION PATTERN] key.
GTo set up the sprite pattern
2-1. Touch the [SPRITE PATTERN] key to
set a desired sprite pattern.
2-2. Touch a desired [SPRITE PATTERN] key.
3. Press the [DISP] button again or touch the
[RTN] key two times to return to the STAN-
DARD display.
19
VRX835