Clarion VRX835 Installation And Wire Connection Manual
  1. Manuals
  2. Brands
  3. Clarion Manuals
  4. Car Receiver
  5. VRX835
  6. Installation and wire connection manual
Clarion VRX835 Installation And Wire Connection Manual

Clarion VRX835 Installation And Wire Connection Manual

Hide thumbs Also See for VRX835:
Table of Contents

Advertisement

Quick Links

See also: Owners & Installation Manual
1.
BEFORE STARTING
1. This set is exclusively for use in cars with a
negative ground 12 V power supply.
2. Read these instructions carefully.
3. Be sure to disconnect the battery "v" termi-
nal before starting. This is to prevent short
circuits during installation. (Figure 1)
2.

PACKAGE CONTENTS

3 Manuals
Owner's manual & Installation manual
Warranty card
4 Power supply lead (For the tuner amp unit)
5 Connection cord (Main unit
unit)
6 Antenna extension cord
Sems hexagonal bolt (M5 8) ..................... 5
Machine screw (M4 3) ............................... 4
VRX835
Installation and Wire connection manual
Contents
1. BEFORE STARTING ............................................................... 47
2. PACKAGE CONTENTS ........................................................... 47
3. GENERAL CAUTIONS ............................................................ 48
4. CAUTIONS ON INSTALLATION .............................................. 48
5. INSTALLING THE MAIN UNIT ................................................. 49
6. REMOVING THE MAIN UNIT .................................................. 51
7. CAUTIONS ON WIRING .......................................................... 51
8. WIRE CONNECTION .............................................................. 52
9. SAMPLE SYSTEMS ................................................................ 55
Tuner amp
8) ............................ 4
Figure 1
Hook plate ................................................... 2
Cord clamp
Spacer
Special screw
Maunting bracket ......................................... 2
Canoe clip ................................................... 4
0 Universal mounting bracket
! Remote control unit
@ Battery
(for remote control unit)
# Outer Escutcheon
$ DCP Case
Car battery
8) .............................. 4
47
VRX835

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VRX835 and is the answer not in the manual?

Questions and answers

Related Manuals for Clarion VRX835

Summary of Contents for Clarion VRX835

  • Page 1: Table Of Contents

    VRX835 Installation and Wire connection manual Contents 1. BEFORE STARTING ............... 47 2. PACKAGE CONTENTS ............47 3. GENERAL CAUTIONS ............48 4. CAUTIONS ON INSTALLATION ..........48 5. INSTALLING THE MAIN UNIT ..........49 6. REMOVING THE MAIN UNIT ..........51 7.

  • Page 2: Before Starting

    For tough dirt, apply a little cold or dealer or an authorized CLARION service warm water to a soft cloth and wipe off the centre.

  • Page 3: Installing The Main Unit

    3. Insert the main unit into the universal mount- 1) Some car models require special mounting kits ing bracket until it locks. for proper installation. Consult your Clarion 4. Mount the outer escutcheon so that all the dealer for details.
  • Page 4 Fixed Mount (TOYOTA, NISSAN and other ISO/DIN equipped vehicles) This unit is designed for fixed installation in the rection of arrow to remove it. Repeat the dashboard. same for the other side to remove the springs from the both sides. (Figure 7) If the vehicle is equipped with a factory-installed radio, install the main unit with the parts and 2.

  • Page 5: Main Unit

    REMOVING THE MAIN UNIT 1. When the rear of the main unit has been se- pull the main unit out by the hook plate. (In- cured with the method shown in Figure 6 un- sert both the right and left edges of the hook fasten the special screw.

  • Page 6: Tuner Amp Unit

    WIRE CONNECTION Securely connect to the metal part of the car with a Black Earth (ground) cord screw, etc. Choke coil Main power supply cord Yellow Fuse CeNET cable (provided with this unit) CeNET cable (Sold separately) Subwoofer output terminal L+R (RCA) Power supply lead Front audio output (input)
  • Page 7 Purple/Black Purple Green/Black Blue/White Green Brawn Glay Grass-green ¡ Description Glay/Black REAR RIGHT B REAR RIGHT v FRONT RIGHT B Orange/White FRONT RIGHT v FRONT LEFT B White/Black FRONT LEFT v REAR LEFT B REAR LEFT v +12 V MAIN POWER White AUTO ANTENNA ILLUMINATION...
  • Page 8 Connecting the Accessories • Connection to the external amplifier The external amplifier cannot be connected unless the DSP is connected. For detailed information, refer to the instruction manual of the DSP. • Connection to the CCD camera for vehicle The CCD camera for vehicle can be connected to the CCD terminal on the main unit. For detailed information, refer to the instruction sheet or manual for the CCD camera.

  • Page 9: Sample Systems

    SAMPLE SYSTEMS Sample System 1 VRX835 Front Speakers Rear Speakers RCA video cable (sold separately) Tuner Amp Unit Rear View DVD input Monitor TV Tuner input RCA video cable CeNET cable (included the TV tuner) (included the TV tuner) TV tuner (TTX7501z) CeNET Cable (included the Changer)
  • Page 10 Sample System 2 VRX835 RCA video cable Rear View (sold separately) Monitor AV Adapter cable (CCA-389, sold separately) Tuner Amp Unit DVD input Front Speakers TV Tuner input CeNET RCA video cable cable (included the TV tuner) (included the TV RCA cable tuner) (sold separately)

This manual is also suitable for:

Ttx7501zDcz625Vcz625

Table of Contents