High definition ip phones series for microsoft teams (60 pages)
Summary of Contents for AudioCodes 320HD
Page 1
AudioCodes 320HD AudioCodes 320HD AudioCodes 320HD and Elastix Server and Elastix Server and Elastix Server Setup Guide Setup Guide Setup Guide http://www.elastix.org http://www.elastix.org http://www.elastix.org...
Figure 1-1 Figure 1-1 is a setup diagram for a single IP Phone AudioCodes 320HD configuration. The is a setup diagram for a single IP Phone AudioCodes 320HD configuration. The is a setup diagram for a single IP Phone AudioCodes 320HD configuration. The phone is setup as a SIP telephony device.
4.0 Setup Procedure AudioCodes 320HD Server Setup Guide To set up the Elastix Server for the AudioCodes 320HD, 1. Go to the web address of the Elastix Server Login page. The web address is determined by the customer, for this guide we have used the IP address 192.168.1.65 2.
Page 4
PaloSanto Solutions PaloSanto Solutions PaloSanto Solutions AudioCodes 320HD Server Setup Guide AudioCodes 320HD Server Setup Guide AudioCodes 320HD Server Setup Guide Figure 4-3. Add an Extension Figure 4-3. Add an Extension Figure 4-3. Add an Extension 6. On the Add SIP Extension page (Figure 4-4), fill in the following information: 6.
Page 5
9. With this you have just finished creating a SIP extension that will be used by the AudioCodes 320HD to register with the Elastix Server. Repeat Steps 5 through 8 to similarly create another extension (different values on Step 6) to be used by the IP (SIP) Phone to register as well (extension 302 in this example).
Page 6
PaloSanto Solutions AudioCodes 320HD Server Setup Guide Figure 4-7. AudioCodes 320HD WebUI To register the AudioCodes Phone we have two methods: Manual Configuration and AutoProvisioning using Elastix’s Endpoint Configurator.
3. Configure the other IP (SIP) Phone with the correct parameters. 4. To test the AudioCodes 320HD, pick up the previously configured IP (SIP) Phone and call the AudioCodes 320HD’s extension number (301 in this example). When the call is established, speak into the phone and verify that the other IP (SIP) Phone can hear your voice.
Page 8
AUTOPROVISIONING USING ELASTIX’S ENDPOINT CONFIGURATOR 1. In the AudioCodes 320HD WebUI, go to “Management => Automatic Update”. Copy apart the “Configuration URL” (Figure 4.9) and replace the PovisioningServer by Elastix’s IP Address, and the ‘/’ character from the cfg file with ‘_’, something like this:...
Page 9
PaloSanto Solutions AudioCodes 320HD Server Setup Guide Figure 4.11 Endpoint Configurator 4. Next to the “Discover Endpoints in this Network” button, type the address where the phone is located and hit Enter (or click the button). This will generate a list with all the phones available in that network (Figure 4-12).
Page 10
7. Configure the other IP (SIP) Phone with the correct parameters. 8. To test the AudioCodes 320HD, pick up the previously configured IP (SIP) Phone and call the AudioCodes 320HD’s extension number (301 in this example). When the call is established, speak into the phone and verify that the other IP (SIP) Phone can hear your voice.