Indicator Lamp - Intermec EasyCoder C4 User Manual

Indicator Lamp

When the power to the printer is switched on, the indicator lamp will
glow green if the printer is loaded with media and—in case of thermal
transfer printing—ribbon.
If the printer is out of media and/or ribbon, the indicator lamp will glow
red.
Any error condition, such as label stop sensor problems, media jams, or
software errors, will be indicated by the lamp changing to orange, except
for media jams in the optional cutter, which are indicated by long red
fl ashes.
If the indicator lamp fails to work as described above, please refer to
Chapter 4 "Troubleshooting".
Color
Intermec EasyCoder C4—User's Guide
Green (solid)
Green (flashing)
Red (solid)
Red (short flashes)
Red (long flashes)
Orange
Dark
Chapter 2—Operation
Meaning
Media loaded
Ribbon loaded (TTR only)
Receiving data
(Test Mode only)
Out of media
Out of ribbon (TTR only)
Printer reset
Upgrading firmware
Overtemperature
Media jam in cutter
Overheated printhead or
stepper motor
Error condition detected or
Bootloader active
Power off
11