Connect The Free End Of The Ribbon Cable - Intermec EasyCoder 3240 Instruction Sheet

Centronics parallel i/o card

Hide thumbs Also See for EasyCoder 3240:

Table of Contents

6. Connect the free end of the ribbon cable to the appropriate connector (see the

following table) on the main PCB.

3240

3400A and B

3400C and D

3440

3600

7. Reinstall and secure the media cover and electronics cover.

8. Reinstall the power cord.

9. Test that the printer recognizes the parallel I/O card by printing a hardware

configuration test label. See the printer user's manual for instructions on printing a

hardware configuration test label. The following message should appear on the

configuration test label:

I/O Option Card: Centronix

Table of Contents

Need help?

Do you have a question about the EasyCoder 3240 and is the answer not in the manual?

3440 3600 4400 3400