Intermec EasyCoder 201II Startup Manual page 8

Intermec Shell 4.01 Standard – Startup Manual
USING INTERMEC SHELL, cont'd.
Options in Intermec Shell,
cont'd.
• Line Analyzer is an Intermec Fingerprint programs that captures
all characters received by the printer on a specified communication
channel and prints them on labels.
Refer to the chapter "Line Analyzer" later in this manual.
• Other Application Programs
If the printer contains any other application programs – standard
or custom-made – these will presented as additional options.
When you have selected an application, the printer beeps and the
error lamps comes on. Then the display goes blank as the printer is
restarted. After a short moment, the printer starts up and the
Intermec Shell countdown menus are shown again. You can either
enter Intermec Shell or ignore the countdown menus and just wait
5 seconds for the selected application to be started.
As long as you do not select another application in Intermec Shell,
the same application will be automatically selected at each power-
up, unless you enter Intermec Shell in the countdown menus.
As an alternative to selecting an application, you can step through
a number of useful facilities:
Setup Mode
The Setup Mode allows you to adjust the Label Stop Sensor (LSS)
and to read the printer's present setup in its display window. For
information on the various setup parameters, please refer to the
Technical Manual for the printer model in question. The Setup
Mode is further described in a separate chapter later on.
Print Setup
The Print Setup option allows you to produce a printout of the
printer's current setup values.
Testfeed
The Testfeed option allows you to feed out one label, ticket, tag or
piece of strip while the printer auto-adjusts its paper feed and label
stop sensor or black mark sensor. It is recommended to perform at
least two Testfeed operations.
Test Label
The Test Label option allows you to print a series of four test labels
in order to test the printout quality and printhead alignment. The
labels are presented in an infinite loop, so you can print the series
over and over again.
Continued!
7