Intermec EasyCoder 201II Startup Manual page 9

Intermec Shell 4.01 Standard – Startup Manual
USING INTERMEC SHELL, cont'd.
Options in Intermec Shell,
cont'd.
Ser-Com Reset
The Ser-Com Reset option allows you to reset the serial communi-
cation setup parameters for all serial communication channels to
their respective default values:
Default Communication Setup:
Baudrate:
Parity:
Char. length:
Stopbits:
Flow control:
New line:
Clear RAM Memory
The Intermec Windows Drivers require a certain amount of free
memory space in the printer, depending on the size of the print
image. The Clear RAM Memory option is used to erase most of the
printer's RAM memory in order to provide such memory space, if
necessary. Only use the Clear Memory option when you experience
problems with printing via any of the drivers and when you are sure
that you do not have any irreplaceable files in the RAM memory!
Reboot
The Reboot option has the same effect as turning off and on the
power to the printer. To exit Intermec Shell without having selected
any application program, use Reboot or restart the printer. Then
wait for the 5 seconds countdown without taking any action, and the
last selected application will be opened.
9600
none
7 bits
2
XON/XOFF to/from host
CR/LF
Continued!
8