Selecting An Application - Intermec EasyCoder 201II Startup Manual
Startup program
Hide thumbs
Also See for EasyCoder 201II:
- Technical manual (95 pages) ,
- Supplementary manual (14 pages) ,
- Installation and operation (5 pages)
Table of Contents
Advertisement
Intermec Shell 4.01 Standard – Startup Manual
TERMINAL SETUP, cont'd.
Selecting an Application
This example shows how you for example can select the Intermec
Fingerprint application:
----------------
SHELL
SEL. APPLICATION
----------------
(Y / N):Y
----------------
SEL. APPLICATION
CURRENT APPL.
----------------
(Y / N):N
----------------
SEL. APPLICATION
LABELSHOP
----------------
(Y / N):N
----------------
SEL. APPLICATION
WINDOWS DRIVER
----------------
((Y / N):N
----------------
SEL. APPLICATION
Fingerprint 6.13
----------------
(Y / N):Y
----------------
STD I/O CHANNEL
UART1
----------------
(Y / N):Y
When you have answered the final prompt, the printer will exit
Terminal Setup, reboot and start the selected application.
16
Advertisement
Table of Contents
