Overview Of The Ethernet Adapter - Intermec ColorCoder 901 Installation Manual

Overview of the Ethernet Adapter

You can use three options to connect your Intermec printer to an
Ethernet network:
The external Ethernet adapter, Part No. 068788, which is a plug-in
network adapter.
The internal Ethernet adapters, Part Nos. 068789 and 069227,
which are installed in your printer.
You can connect only the external Ethernet adapter to the following
Intermec printers to print labels:
91* printers
301* printers
401* printers
501*, 501E*, 501S*, and
501XP printers
* These printer models require an external power supply to run the
external Ethernet adapter.
You can connect either the external or the internal Ethernet adapter Part
No. 068789 to the following Intermec printers to print labels:
3240* printers
3400* and 3440* printers
3600* printers
4400* printers
* These printer models require an external power supply to run the
external Ethernet adapter.
Note: For the 3240, 3400, 3440, 3600, and 4400 printers, you must
have the parallel port option installed on your printer to connect the
external Ethernet adapter. The Ethernet adapter is not compatible with
the 4400A, but you can use the adapter with all later 4400 models.
You can connect the internal Ethernet adapter Part No. 069227 to the
4420 and 4440 printers.
Note: With the internal Ethernet adapter installed, the parallel port on
the 4420 and 4440 printers is not available for use.
601XP printers
901* printers
4630* printers
7421 and 7422* printers
5