Installing For A Netware Network; Using Ndps Or Axis Netpilot To Install The Ethernet Adapter - Intermec ColorCoder 901 Installation Manual

Installing for a NetWare Network

This section covers the following:
Using Novell Distributed Print Services (NDPS) or AXIS
NetPilot to install the Ethernet adapter
Setting up print queues and advanced operating parameters
Using NDPS or AXIS NetPilot to Install the
Ethernet Adapter
When installing your Ethernet adapter into a NetWare network, you
have three options:
Install your Ethernet adapter using NDPS for a public access
printer.
Install your Ethernet adapter using NDPS for a controlled access
printer.
Install your Ethernet adapter using AXIS NetPilot.
If you are using NDPS, you must install the HP Gateway together with
NDPS on your file server. Otherwise you must install your Ethernet
adapter with the AXIS NetPilot Installation Wizard.
To install an Ethernet adapter in a NetWare network using NDPS
(public access printer)
1. Make sure that the HP Gateway is configured to automatically
create a public access printer.
2. Connect the Ethernet adapter to the NetWare network, if it is not
already connected.
The HP Gateway automatically creates a public access printer. Any user
can access this printer.
To install an Ethernet adapter in a NetWare network using NDPS
(controlled access printer)
1. Make sure that the HP Gateway is not configured to automatically
create a public access printer.
12