Table of Contents
Advertisement
2. Choose Network from the Toolbar or Setup menu. A new Network
environments window opens. From this window, you may create
new print queues, connect to previously established queues, and
select the mode of operation (Print Server or Remote Printer) for
each printer.
To set up the advanced operating parameters
1. Open the Network Print Servers folder and select the Network Print
Server you want to set up.
2. Choose Properties from the Toolbar or Setup menu.
A set of tabbed Property Pages opens that allows you to refine the
chosen mode of operation, such as password protection, frame type
selection, or the queue polling interval.
The NetWare configuration is now complete.
To verify that the Ethernet adapter is functioning correctly, you should
print a label from within a Windows application, such as Microsoft
Word. When you select Print from the File menu, make sure that your
Intermec printer is selected as the Active Printer.
Installing for a UNIX Network
Note: You must have UNIX root privileges for this configuration
procedure.
To install for a UNIX network
1. Acquire an unused IP address from your Network Administrator and
choose a unique name for the Ethernet adapter.
2. Add your Ethernet adapter IP address and host name to your system
host table by adding the following line to the
IP_address host_name
Example:
192.36.253.96 salesdept
3. Update your alias name databases (YP/NIS).
14
file:
/etc/hosts
Advertisement
Table of Contents
