Windows Clients Using Lantastic; Printing From A Windows Network; Installing For An Os/2 Network - Intermec ColorCoder 901 Installation Manual

Windows Clients Using LANtastic

From any Windows client, you can use the Ethernet adapter for network
printing within LANtastic environments. Choose your utility software
based on the Windows client you use. For help, see the appropriate
Windows section earlier in this guide. Please ensure that your
LANtastic client is running the desired printing protocol.

Printing From a Windows Network

To print from a Windows network
1. Select Print from the File menu within your application.
2. If the printer you want to use is the default printer, print from your
application as normal.
3. If the required printer is not selected as the default printer, click
Setup in the Print Document window and then select the name of the
required printer.
4. Set up any of the parameters as needed, such as paper size and
source.
Note: Make sure the paper size matches the size of your label stock.
5. Click OK and then print the file as you normally would.

Installing for an OS/2 Network

Note: AXIS Print Utility for OS/2 must be running when you print
through your Ethernet adapter. We recommend that you copy the AXIS
Print Utility icon into your StartUp file.
To install an Ethernet adapter for an OS/2 network
1. Make sure that the NetBEUI protocol is active. If necessary, use
MPTS/LAPS (LAN Server) or SETUP (LAN Manager) to activate
it.
2. Insert the Print Utilities for OS/2 disk into your disk drive, and open
an OS/2 window. Run the install.exe program
.
19