Installing for a Macintosh Network
Note: You need to supply a printer driver or a network compatible
application to work with the Intermec printers.
To install for a Macintosh network
1. Open the Chooser window by selecting Chooser in the Apple menu.
2. Click on your printer driver icon.
3. If your network has more than one zone, click the name of the
default zone.
4. Click the name of the printer you want. The default printer name is
shown as:
AXISnnnnnn_port
where:
nnnnnn is the last six digits of the serial number.
port
is LPT1.
For example:
AX540B35_LPT1
5. Click the close box.
The AppleTalk Configuration is now complete. Repeat this procedure
for each Macintosh that will print to the Intermec printer.
To choose a printer to print
1. Select Chooser in the Apple menu.
2. Click on your printer driver icon.
3. If your network has more than one zone, click the default zone.
4. Click the name of the printer you want.
5. Click the close box. You may now print from the application as
normal.
11