Setting Display Parameters - Intermec Janus 2010 User Manual

JANUS Application Simulator User's Manual

Setting Display Parameters

You can view or set the values for the display parameters.
To set a display parameter
1. From the Edit menu, choose Display. This Select parameter window
2. To view the
3. To customize a
4. Choose Close to return to the main menu.
4-14
appears:
The display
parameters are
contained in the
list box.
current value for
a parameter,
select the
parameter. The
current value
appears below
the list box.
parameter, either
double-click on it
or select it and
choose Edit.
Another window appears, displaying the values you can choose for the
parameter. At that window, select a value and choose OK. You return to
this Select parameter window.