Link_Comm_Return; Serial_Protocol_Control_Return - Intermec Janus 2010 User Manual

link_comm_return

Description Specifies the return value after the application attempts
to link a Reader Wedge and a designated COM port.
Default 0500H – Reader Wedge success
Values See the "Reader Wedge Standard Return Values List"
on page 3-40.
Function im_link_comm
Interrupt INT 7DH
Notes Once a JANUS application calls the im_link_comm PSK
function, other PSK functions that require a link or
unlink will operate as if the link were successfully
established—even if you select a value for the
link_comm_return parameter that indicates the
im_link_comm function failed.

serial_protocol_control_return

Description Specifies the return value for the simulated
im_serial_protocol_control function.
Default 0500H – Reader Wedge success
Values See the "Reader Wedge Standard Return Values List"
on page 3-40.
Function im_serial_protocol_control
Interrupt INT 7DH
Learning About the INI File
3
3-37