Updating The Simulator Tsr With The Current Ini File - Intermec Janus 2010 User Manual

Updating the Simulator TSR With the Current INI File

The Simulator TSR can be running while you use the Editor to create or edit
initialization files. If the TSR is running, you can load a new or changed INI
file into the Simulator TSR without exiting the Editor or stopping the
Simulator TSR.
For example, if you start the Simulator TSR with the default INI file,
JANUSSIM.INI, you can use the Editor to:
• Create a new INI file called LOWBAT.INI and load the new file into the
• Edit the default INI file, JANUSSIM.INI, and load the changed file into
To update the Simulator TSR with a new or changed INI file
1. Make sure the Simulator TSR is running.
2. Start the Editor. Either create or edit any INI file.
2. From the File menu, choose Update Simulator.
3. If the Simulator TSR is running, a status message appears:
4. If the Simulator TSR is not running, an error message appears:
Simulator TSR as it runs in the background.
the Simulator TSR as it runs in the background.
Simulator has been updated.
Choose OK. You return to the main menu. The Simulator TSR has been
updated with the current INI file.
The Simulator TSR is not running. Please exit the Editor, shut down Windows,
and start the TSR.
Follow the instructions in the message. To start the TSR with a specific
INI file, enter this command at the MS-DOS prompt:
janussim filename.ini
Where filename.ini is the name of the INI file.
Customizing INI Files With the Editor
4
4-21