Intermec Janus 2010 User Manual page 38

JANUS Application Simulator User's Manual
expanded_keyboard_status = 0 - command complete
kb_insert_string_status = 0 - success
kb_insert_string_capacity = 255
flush_exp_keyboard_status = 0 - success
warmboot_status = 0 - warmboot disabled
power_status_line = 1 - AC line connected
power_status_battery = 2 - critical battery
power_status_backup = 1 - backup low
power_status_batt_life = 93
power_status_return = 0800H - Power management success
display_contrast_level = 16
display_size_mode = 0 - 80 x 25
display_video_mode = 3 - std video mode 3 (80x25)
display_scroll_mode = 1 - scroll at 16
display_viewport_lock = 0 - locked
display_x_pos = 0
display_y_pos = 0
display_backlight = 0 - backlight off
display_char_height = 0 - standard height characters
appl_break_status = 0 - break not been made
follow_cursor = 1 - follow cursor mode on
control_key = 0 - control key disabled
keyclick = 0 - keyclick off
numeric_keypad_switching = 0FFH - numeric keypad switching permitted
numeric_keypad_status = 0FFH - number pad enabled
label_symbology = 1 - Code 39
sim_wand_key = CTRL/G
clear_abort_callback_return = 0500H - Reader Wedge success
command_return = 0500H - Reader Wedge success
link_comm_return = 0500H - Reader Wedge success
serial_protocol_control_return = 0500H - Reader Wedge success
standby_wait_return = 0500H - Reader Wedge success
unlink_comm_return = 0500H - Reader Wedge success
Note: This example JANUSSIM.INI file shows the text message for each value as it
appears in the INI file, in the software, and on the JANUS. However, the rest of this
manual shows messages without abbreviations to make them more readable.
3-4