Intermec Janus 2010 User Manual page 80

JANUS Application Simulator User's Manual
Here is the LOWBAT.INI file with the customized parameters shaded for
emphasis:
;
; Filename: LOWBAT.INI
;
port1_read_file = comport1.rcv
port2_read_file = comport2.rcv
port3_read_file = comport3.rcv
port4_read_file = comport4.rcv
port1_write_file = comport1.trx
port2_write_file = comport2.trx
port3_write_file = comport3.trx
port4_write_file = comport4.trx
rx_check_status_return = 0600H - Comm Operation successful
protocol_ext_status_return = 0600H - Comm Operation successful
cancel_rx_buff_return = 0600H - Comm Operation successful
cancel_tx_buff_return = 0600H - Comm Operation successful
UART_status = 30H
expanded_keyboard_status = 0 - command complete
kb_insert_string_status = 0 - success
kb_insert_string_capacity = 255
flush_exp_keyboard_status = 0 - success
warmboot_status = 0 - warmboot disabled
power_status_line = 0 - AC line not connected
power_status_battery = 2 - critical battery
power_status_backup = 1 - backup low
power_status_batt_life = 10
power_status_return = 0800H - Power management success
display_contrast_level = 16
display_size_mode = 0 - 80 x 25
display_video_mode = 3 - std video mode 3 (80x25)
display_scroll_mode = 1 - scroll at 16
display_viewport_lock = 0 - locked
display_x_pos = 0
display_y_pos = 0
display_backlight = 0 - backlight off
display_char_height = 0 - standard height characters
appl_break_status = 0 - break not been made
follow_cursor = 1 - follow cursor mode on
control_key = 0 - control key disabled
keyclick = 0 - keyclick off
4-4