Configuring TE Parameters
Key Sequence to Open Main Menu
™
TE 2000
3270 Terminal Emulation Programmer's Guide
This chapter contains the TE configuration menus for the following termi-
nals: 2415, 2425, 2435A, 2455, 2475, 248X, 6400, 5020, 5055, 59XX,
17XX, 11XX, 700 Series, CK30, CK31, and CV60 unless otherwise no-
ted. Additional information is available for each of the following:
S Trakker Antares (2415, 2425, 2435A, 2455, 2475, 248X)
S 6400 Computer
S 5055 Data Collection PC
Note: Screens are shown with all of the available options.
S If an option is not assigned to a specific terminal, then that option is
available for all of the terminals addressed in this publication.
S If an option is specific towards a terminal, this option does not appear
on the display, or will be blank, for all other terminals.
To configure TE parameters on your respective terminal, at the initializa-
tion screens or anywhere in a TE session, access the Main Menu by press-
ing the following key sequence:
Terminal
Key Sequence
) !
2415
( 5
( !
2425
r l
2435A
Green >, Orange > (48-key keyboard)
r l
( ¡
2455, 2475, 248X
6400
[Gold] [Blue]
C A
5020
5055
[Blue] [M] or [ALT] [M]
59XX
[Brown] [Black]
17XX, 11XX
[Gold] [Black]
700
Tap twice on the upper-right corner of the display; or
via the Software Input Panel (SIP) keyboard, tap
CK30
[Alt] [M] (52-key keyboard)
C [Ctl] [M] (50-key keyboard)
[Alt] B [F3] (42-key keyboard)
CK31
Tap twice on the upper-right corner of the display; or via the
external keyboard, press [Alt] [M].
CV60
Tap twice on the upper-right corner of the display; or via the
external keyboard, press [Alt] [M].
—
Chapter 4
Using the Terminal Emulation Menus
(55-key keyboard)
(37-key keyboard)
(57-key keyboard)
(39-key function numeric keyboard)
page 160
page 160
page 161
S G
.
81