Units; Use Last Saved; X-Offset; Y-Offset - Intermec EasyCoder PD41 Programmer's Manual

Units

Purpose:

Use Last Saved

Purpose:

X-Offset

Purpose:
Default:

Y-Offset

Purpose:
Default:

Entering Parameters

You enter parameters on the printer differently depending on the
printer model.
• Use the numeric keyboard to access the alpha characters on
the PF/PM/PX printers.
• Send a text file from the PD41 and PB50 printers that do not
have keyboards. For help, see
File Download" on page
Use the following illustrations and sections to understand how to
switch modes and select characters on the PF/PM/PX printers.
32
The unit of measurement used when entering
the Label Length or Label Width values. You
can set this command to millimeters or inches.
Sets all of the ZSim program values back to the
last saved configuration. Use Save Current to
save configuration parameters.
Positions the printout distance from the left
edge of the label. Range ± 0 to 999 dots.
0 dots
Positions the printout distance from the front
edge of the label. Range ± 0 to 999 dots.
0 dots
16.
"Configuring ZSim Using Text
ZSim Programmer's Guide