Discarding Changes; Restoring The Default Values - Intermec Janus 2010 User Manual

JANUS Application Simulator User's Manual

Discarding Changes

You can discard changes when you exit the Editor.
To discard the changes
1. From the File menu, choose Exit. If you made changes to the INI file that
2. To discard the changes, choose the No Save button. The changes are not

Restoring the Default Values

Sometimes you will want to reset all the parameters in the current INI file to
their default settings. You can do this at any time when the Editor is
running. For a description of the parameters and their defaults, see Chapter
3.
To restore the defaults
1. From the File menu, choose Restore Defaults. The Editor displays this
2. Choose Restore to restore the defaults. The Editor resets the parameters
3. Choose OK.
4-20
you have not saved yet, the Editor displays the message:
Do you want to save changes to file name ?
saved, the Editor shuts down, and you return to your Windows desktop.
message:
All parameters will be reset to their default values. Do you want to proceed?
to their defaults and displays the message:
All defaults have been restored.