IBM IntelliStation A Pro 6217 Service Manual page 131

1. Read the safety information that begins on page vii and "Installation guidelines"
on page 79.
2. Turn off the computer and all attached devices.
3. Disconnect all external cables and power cords; then, remove the side cover
(see "Removing the side cover" on page 81)
4. Remove the support bracket (see "Removing the support bracket" on page 83).
5. Remove the air baffle.
a. Lift up on the large end of the air baffle until it releases.
b. Slide the air baffle toward the front of the computer; then, lift it out of the
computer.
6. Disconnect the fan sink cable, noting its location.
Microprocessor
Retention
spring clips
Figure 28. Connector locations on microprocessor board
7. Disconnect any cables that impede access to the microprocessor.
8. Loosen the two captive screws (in the leaf spring enclosures) on either side of
the fan sink.
Fan sink
Fan sink
cable
Microprocessor
orientation indicators
Microprocessor
socket
Fan sink connector
Chapter 4. Removing and replacing computer components
115