IBM IntelliStation A Pro 6217 Service Manual page 104

documentation for complete instructions for installing a SCSI adapter in the
computer and for additional information about SCSI adapters.
The following notes describe information that you must consider when cabling an
optional SCSI adapter.
v The SCSI cables that are used by the integrated SCSI controller cannot be used
v If you install a ServeRAID 6i+ adapter, it must be installed in slot 3; no cabling is
To cable an optional SCSI adapter, complete the following steps:
1. Install the SCSI adapter.
2. Connect the SCSI-signal cable to the adapter and to one or more of the
Rear
adapter-
support
bracket
Figure 14. SCSI signal cable placement
3. Complete the installation of the optional SCSI adapter.
88
IBM IntelliStation A Pro Type 6217: Problem Determination and Service Guide
with an optional SCSI adapter.
required for this adapter.
signal-cable connectors on the rear of the SCSI devices.
SCSI
signal
cable
SCSI signal
cable connector
SCSI
adapter
13 94
SCSI
Front
LED
adapter-
support
bracket