HP HPE 3PAR StoreServ 8000 Installation Manual page 89

Table 29 System software installation checklist
3PAR StoreServ Storage serial number
The 3PAR StoreServ Storage system serial number can be obtained from the
following:
Located at the rear of the system next to the power switch for the controller
node enclosure PCM
Located in the product documentation provided with your system
3PAR StoreServ Storage system name
IP address (IPv4 only)
Subnet mask
Gateway IP address
Date and time:
Copy from the SP
Enter manually
Use Network Time Protocol (NTP) server information
Time Zone
New password to assign 3paradm (to access the system)
NOTE: Passwords for the 3paradm username can include all printable characters
and be between 6-8 characters in length.
Performing host configurations after using 3PAR SmartStart for installation setup
requires an available server to run Microsoft Windows Server 2008 R2, x64 Edition;
Windows Server 2012; or Windows 7.
3PAR StoreServ Storage system
HPE 3PAR SmartStart
System Software Installation Checklist 89