Hpe 3Par Service Processor Setup Wizard - HP HPE 3PAR StoreServ 8000 Installation Manual

HPE 3PAR Service Processor Setup Wizard

The 3PAR Service Processor Setup Wizard proceeds through the following wizard steps:
Welcome
Generate SP ID
Networking
Remote Support
System Support Information
Time and Region
Change Passwords
Summary
Applying Settings
Finish
Follow the instructions on each screen, and then click Next to proceed to the next wizard step.
To launch the wizards in 3PAR SmartStart:
1. Verify that the SP is powered on.
2. Click the Initialize Service Processor link in 2 Initialize Service Processor.
3. Enter the SP IP address and click OK.
NOTE:
address.
NOTE:
use of the certificate and a blocking page will appear. You can ignore the warning and
continue to go to the website.
4. On the browser window, enter setupusr in the User Name box, and leave the password
box blank.
5. Click OK.
NOTE:
Microsoft Internet Explorer 10 with default security settings. If the wizard continues to display
incorrectly, try refreshing the browser page.
100 Service Processor and System Setup
When configuring in a DHCP network environment, enter the VSP temporary IP
A security certificate error might occur when there is a problem with a web server's
The 3PAR Service Processor Setup Wizard might not display correctly when using