Creating An Ethernet Connection To Work - Intermec 700 Series 700 User Manual

700 Series Monochrome Mobile Computer User's Manual
9 Tap the Dialing Locations tab and specify your current location and
phone type (most phone lines are tone). These settings will apply to all
connections you create.
To start the connection, start using one of the following programs. Your
700 Series Computer will automatically begin connecting. Once con-
nected, you can:
S Send and receive e-mail messages by using Inbox. Before you can use
Inbox, you need to provide the information it needs to communicate
with the e-mail server. For specific instructions, see "Connecting Directly
to an E-mail Server" on page 85.
S Visit Internet or intranet Web or WAP pages via Pocket Internet Ex-
plorer.
S Send and receive instant messages with MSN Messenger. For more in-
formation, see "MSN Messenger" on page 59.
S Synchronize. For more information, see ActiveSync Help on the desktop
computer.

Creating an Ethernet Connection to Work

1 You do not need to create a new connection on your 700 Series Com-
puter. Instead, you must purchase a dock to enable on-board Ethernet
or purchase a CompactFlash Ethernet card that is compatible with your
700 Series Computer.
2 Obtain the following information from your ISP:
S User name
S Password
S Domain name
—
Chapter 2 Pocket PC 2002
83