Parameter
Default
Decoding
Not Active
Bar Code Length
Any Bar Code Length
700 Series Monochrome Mobile Computer User's Manual
Note: The following default settings and enumerations apply to both the
IS9CConfig::GetCode93 and IS9CConfig::SetCode93 functions.
Code 93 Default Settings
Valid Range
ITC_CODE93_DECODING
0x00–0xFE ITC_BC_LENGTH_NO_CHANGE
Code 93 Enumerations
Use this when the bar code length does not require any change.
typedef enum tagCode93Decoding
{
ITC_CODE93_NOTACTIVE = 0,
ITC_CODE93_ACTIVE = 1,
ITC_CODE93_NO_CHANGE = 255
} ITC_CODE93_DECODING;
#define ITC_BC_LENGTH_NO_CHANGE 255.
—
Chapter 6
Scanner Support
// Default
185