Creating An Ethernet Connection To An Isp - Intermec 70 User Manual

To start the connection, simply start using one of the following programs. Your Model
70 automatically begins connecting. Once connected, you can
•
send and receive e-mail messages by using Inbox. Before you can use Inbox, you
need to provide the information it needs to communicate with the e-mail server. For
specific instructions, see "Connecting Directly to an E-Mail Server" later in this
chapter.
•
visit Web and WAP pages using Pocket Internet Explorer. For more information,
see Chapter 4, "Microsoft Pocket Internet Explorer."

Creating an Ethernet Connection to an ISP

1. You do not need to create a new connection on your Model 70. Instead, you must
purchase and configure an Ethernet card that is compatible with your Model 70.
2. Obtain the following information from your ISP: user name, password, and domain
name.
3. Insert the Ethernet card into your Model 70. For instructions on inserting and using
the Ethernet card, see the owner's manual for the card.
4. The first time you insert the card, Network Settings appears automatically so that
you can configure the Ethernet card. Most networks use DHCP, so you should not
have to change these settings unless your network administrator instructs you to do
so. Tap ok. (If it does not appear or to change settings later, tap
Settings. In the Connections tab, tap Network and then the adapter you want to
change, and then tap Properties.)
5. Connect the Ethernet card to the network by using a network cable. For information,
see your owner's manual.
6. Tap , Settings, Connections tab, and then Connections. From the My Network
card connects to list, select Internet.
To start the connection, simply start using one of the programs on your Model 70.
6
Getting Connected
and then
6-5