Intermec 700 Series 700 User Manual page 127

700 Series Monochrome Mobile Computer User's Manual
S Network:
This specifies the wireless data network used by this radio module, such
as ARDIS or RMDUS.
S Network Activity:
This identifies the present activity of this radio module. Descriptions of
activity include the following:
S IDLE — No messages are being sent.
S XMIT — Message is being transmitted.
S XMIT DONE — Message has been transmitted.
S Network Type:
This would list "MOBITEX/DATATAC" for either the Mobitex RIM
902 radio module or the DataTAC RIM 802 radio module.
S Radio Status:
This identifies the current condition of the radio module. Conditions
include the following:
S LIVE, PWR SAVE — Radio is active, and in the power-saving mode.
S RAPVersion:
This specifies the version of the Radio Access Protocol (RAP) being
used by this radio module.
S Signal:
This identifies the radio signal strength in microvolts (dBm).
S History:
This bar graph displays an active history of this radio module's quality
of connections.
S Friendly Indicator:
Usually indicates the signal strength for this radio module. Three filled
dots indicate a high quality or strong signal. Three empty dots indicate
that the signal is out of range or there is no signal detected.
—
Chapter 4 Network Support
111