Intermec 700 Series 700 User Manual page 237

Parameter Default
Decoding Not Active
Check Verification 1 Digit
Check Digit Enable
700 Series Monochrome Mobile Computer User's Manual
Note: The following default settings and enumerations apply to both the
IS9CConfig2::GetCode11 and IS9CConfig2::SetCode11 functions.
Code 11 Default Settings
Code 11 Enumerations
typedef enum tagCode11Decoding
{
ITC_CODE11_NOTACTIVE = 0,
ITC_CODE11_ACTIVE = 1,
ITC_CODE11_NO_CHANGE = 255
} ITC_CODE11_DECODING;
typedef enum tagCode11CheckVerification
{
ITC_CODE11_CHK_VERIFY_ONEDIGIT = 1,
ITC_CODE11_CHK_VERIFY_TWODIGIT = 2, // Default
ITC_CODE11_CHK_VERIFY_NO_CHANGE = 255
} ITC_CODE11_CHECK_VERIFICATION;
typedef enum tagCode11CheckDigit
{
ITC_CODE11_CHECK_NOTXMIT = 0,
ITC_CODE11_CHECK_XMIT = 1,
ITC_CODE11_CHECK_NO_CHANGE = 255
} ITC_CODE11_CHECK_DIGIT;
Chapter 6
Valid Range
ITC_CODE11_DECODING
ITC_CODE11_CHECK_VERIFICATION
ITC_CODE11_CHECK_DIGIT
// Default
// Default
—
Scanner Support
221