Change/New Dialog - Intermec 6640 Technical Reference

Hotkeys (Virtual Screen Keys)
When done, another box appears with all the hotkeys tested and their results.
Click Done to quit.

Change/New Dialog

The following dialog creates a new hotkey or edits an existing hotkey. Click ei-
ther Change or New from the Hotkey Alignment screen to access this dialog.
KeyName (Required)
Assign a name to the hotkey. There are no restrictions how the hotkey can be
named. A name is required or this hotkey will not be created.
KeySequence
Lists the keys to be stuffed into the keyboard buffer for this hotkey. Note, for
hotkey commands or special keys (except for the contrast and brightness hot-
keys), for every action, there should be a reaction. Thus, assign a key with a
plus (+) to "press" a key, then assign the same key with a minus (–) to "release"
that key, for example:
Use parentheses to separate each key. Spaces between parentheses are optional.
Alignment
Assigns one of five groups: "Top," "Bottom," "Left," "Right," or "None." These
groups categorize the placement of the hotkey on the display and make assump-
tions about the hotkey based on the placements.
3-4 6640/6650 Windows 2000 Technical Reference
"(alt+)(tab+)(tab–)(alt–)"
Bottom
A single row of hotkeys along the bottom of the display. All these hotkeys
are aligned to be as tall as the tallest hotkey and extend to the bottom of
the display.
SECTION 3