Installing The Battery Pack; Figure 4-5 Inserting The Battery - Intermec PEN*KEY 6632 User Manual

Operating the Pen Computer

Installing the Battery Pack

Install and replace battery packs described in the procedure
below.
1. Turn off the pen computer and disconnect the AC
2. Place the pen computer face down on a flat surface.
3. Release the catch on the battery pack cover with your
4. Insert the battery pack(s) facing in the direction indi-
5. Close the battery pack cover.
B CAUTION:
If a battery pack is inserted incorrectly, damage to the battery
pack or a fire could result.
B CAUTION:
Always be sure to use the specified type of battery pack (PN:
871-006-020).
" NOTE:
To remove the battery pack, simply reverse the installation procedure.
R
4-6 PEN*KEY 6632 Pen Computer User's Guide
adapter/recharger.
finger and open the cover.
cated by the arrow.
Figure 4-5
Inserting the Battery
SECTION 4