Pen Stylus; Figure 1-8 Pen Removal - Intermec PEN*KEY 6632 User Manual

Overview

Pen Stylus

To remove the pen stylus, pull it straight out to the right.
To place the pen back in the pen holder, align the projection on
the pen with the groove in the pen holder and then gently
slide the pen into the holder. Make sure that you push the
pen all of the way in until it locks in place, so that it will not
fall out unexpectedly.
" NOTE:
Clean the tip of the pen stylus and the screen before using the it on
the screen. If you use the pen on the screen while either is dirty, the
display could become scratched or the pen might not move smoothly
on the display surface.
B CAUTION:
Use only the pen provided. Do not use a wood pencil,
mechanical pencil, or any other sharp object. Doing so will
scratch the screen.
R
1-14 PEN*KEY 6632 Pen Computer User's Guide
Figure 1-8
Pen Removal
SECTION 1