Electrolux EVE915 Installation & User Manual page 52

52 electrolux.com.au
USING THE INDUCTION HOB
Lock
Use this function to prevent an accidental change of the
heat settings.
• First set the heat setting.
• To start this function touch
show on all zones for 4 seconds before reverting back
to the heat settings.
• The indicator above the lock sensor will remain on.
• Timer functions will continue to operate after the lock
is activated.
• To stop this function touch
appliance will also stop this function.
Child safety lock
Use this function to prevent an accidental operation
of the hob.
• To activate this function, first turn the hob on by
touching the
• Then hold down the
then show on all zones for 4 seconds before reverting
back to the
• Turn the hob off by touching the
the hob is now in a mode where the heat settings
cannot be accidentally operated.
• To unlock, first turn the hob back on by touching the
sensor, and then hold down the
Touch again to switch off. This will bring the hob
back to normal operating mode.
Hob2Hood
This is an advanced automatic function which connects
the hob to a special hood. Both the hob and the hood
have an infra-red signal communicator. The speed of
the fan is defined automatically on the basis of the mode
setting and the temperature of the hottest cooking zone
on the hob. You can also operate the fan from the hob
manually.
IMPORTANT!
For most hoods, the remote system is originally
deactivated. Activate it before you use the function.
For more information refer to your hood user manual.
Operating the function automatically
The default automatic mode from the factory is H5.
You can change the automatic mode by following the
instructions below. When you activate the job the hood
will adjust the fan speed automatically. Please note the
below table is a guide, the fan speed varies depending
on the temperature measured on the cooking zones of
the cooktop which can be affected by the heat setting(s)
selected as well as the size and volume of what you are
cooking.
. The symbol
again. Deactivating the
sensor.
sensor for 2 seconds.
heat setting.
sensor again and
sensor again.
(CONTINUED)
Automatic modes
Mode H0
will then
Mode H1
Mode H2
3)
Mode H3
Mode H4
Mode H5
Mode H6
1. The hob detects the boiling process and activates
fan speed in accordance with automatic mode.
2. The hob detects the frying process and activates
will fan speed in accordance with automatic mode.
3. This mode activates the fan and the light and does
not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance
2. Touch
and goes off.
3. Touch
4. Touch
5. Touch
IMPORTANT!
To operate the hood directly on the hood panel, deactivate
the automatic mode of the function.
When you finish cooking and deactivate the hob, the hood
fan may still operate for a certain period of time. After that
time the system deactivates the fan automatically and
prevents you from accidental activation of the fan for the
next 30 seconds.
Automatic Boiling
1)
light
Off Off
On Off
On Fan speed 1
On Off
On Fan speed 1
On Fan speed 1
On Fan speed 2
for 3 seconds. The display comes on
for 3 seconds.
a few times until comes on.
of the Timer to select an automatic mode.
Frying
2)
Off
Off
Fan speed 1
Fan speed 1
Fan speed 1
Fan speed 2
Fan speed 3