22
electrolux.com.au
BEFORE USING YOUR APPLIANCE
Fitting the shelves and grill dish carrier between
the side rack wires
The shelves are designed so that they have maximum
extension but cannot be accidentally pulled right out.
The grill dish carrier is designed the same way and can
slot straight into the side racks.
To fit a shelf or grill dish carrier to side racks:
1
Locate the rear edge of the shelf/carrier in between
guide rails of the side rack - see diagram.
2
Ensure the same rail positions on both sides of the
oven are being engaged. With the front edge raised,
begin to slide the shelf into the oven.
3
Once the detents have passed the front edge of
the side rack, the shelf can be pushed completely
in. When fully inserted the shelf/carrier should not
interfere with the closed oven door.
Positioning the dishes on the grill dish carrier
(CONTINUED)
Fitting the shelves and grill dish carrier onto
telescopic slides
To fit a shelf or grill dish carrier to telescopic slides:
1
With the slides fully pushed in, push the shelf/carrier
along the top of the slide until it hits the back post.
2
Drop the front of the shelf/carrier ensuring it sits
behind the front post of the slide (see illustration).
When fully inserted the shelf/carrier should not
interfere with the closed oven door.
AirFry Plus tray