Related Manuals for Electrolux EK 5731
Summary of Contents for Electrolux EK 5731
- Page 1 Mixed fuel gas cookers INSTRUCTION BOOKLET Please read this instruction booklet before using the appliance Mod. EK 5731 35673-8401 1 GB...
-
Page 2: Important Safety Information
Do not allow children to play near or with the the cooker. cooker. The appliance (EK 5731 W/GR only) is fitted with The cooker gets hot when it is in use. Children a lid: this is designed as a dust cover when closed, should be kept away until it has cooled. -
Page 3: Table Of Contents
Contents For the User For the Installer Important Safety Information ....2 Instructions for the Installer ..... 19 Description of the Cooker ....4 Important Safety Requirements ..20 Control Panel ........5 Installation ........21 The Oven Cavity ......... 5 Electrical connections ....... -
Page 4: Description Of The Cooker
Description of the Cooker Cooker lid (EK 5731 W/GR only) Rapid burner Semi-rapid burner Auxiliary burner Semi-rapid burner back left front left front right back right grill and oven mains on Control panel temperature Oven door Storage drawer... -
Page 5: Control Panel
Control Panel grill and oven mains on back left front left front right back right temperature Premier 1. Cooker Operation Pilot Light 2. Oven Thermostat Pilot Light 3. Electric Ignition push button 4. Back left burner control knob (rapid) 5. Front left burner control knob (semi-rapid) 6. -
Page 6: Operation
Take care when frying food in hot oil or fat, as the overheated splashes could easily ignite. If the control knobs become difficult to turn, please contact your local Electrolux Service Centre. -
Page 7: Electric Oven
Electric Oven Oven Function Control Knob Oven switched off -max Range of temperature regulation for conventional cooking Oven light Bottom heating element - The heat comes from the bottom of the oven only Top heating element - The heat comes from the top of the oven only Grill - The heat comes only from the top element... -
Page 8: Using The Oven
• Do not place cookware directly on the oven base. • When cooking in the oven (EK 5731 W/GR only), always leave the cooker lid open, in order to avoid overheating. Hints and Tips... -
Page 9: Using The Conventional Oven
Using the Conventional Oven Hints and Tips How to Use the The middle shelf position allows for the best heat Conventional Oven distribution. To increase base browning simply lower Turn the oven function control knob to the the shelf position. To increase top browning, raise the required temperature. -
Page 10: Cooking Chart
Cooking Chart These charts are intended as a guide only. It may be necessary to increase or decrease the temperature to suit your individual requirements. Only experience will enable you to determine the correct setting for your personal requirements. Food Temperature ( C) Runner Cooking... -
Page 11: Grilling
Grilling Grilling must be carried out with the oven Grill door closed. The grill pan handle must be Food Time (Min) removed from the pan. Bacon rashers 2-3 each side How to Use the Grill Beefburgers 6-10 each side 1. Turn the oven control function knob to Chicken joints 10-15 each side 2. -
Page 12: Maintenance And Cleaning
Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the cooker from the electricity supply. The Hob Top The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. -
Page 13: Cleaning The Oven
Cleaning the Oven The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan. Cleaning materials Before using any cleaning materials on your oven, check that they are suitable and that their use is recommended by the manufacturer. -
Page 14: Oven Lamp Replacement
(300 C) having the following characteristics: Voltage: 230-240V (50Hz) Power: Connection: FO 0424 Lid cleaning (EK 5731 W/GR only) The cooker lid can be disassembled for easier cleaning (see fig.). After cleaning, carefully reposition the lid into its hinges. FO 0418... -
Page 15: Something Not Working
If the appliance is not working correctly, please carry out the following checks, before contacting your local Electrolux Service Centre. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. -
Page 16: Service And Spare Parts
* Products of Electrolux manufacture which are not We, Electrolux, undertake that if, within 12 months marketed by Electrolux. of the date of the purchase, this Electrolux appliance or any part thereof is proved to be defective by any European Guarantee... - Page 17 ELECTROLUX SERVICE FORCE To contact your local Electrolux Service Force Centre telephone 08705 929 929 NORTH EAST CHANNEL ISLANDS ISLE OF LEWIS ND Macleod (M69) 16 James Street Stornoway GUERNSEY Guernsey Electricity GATESHEAD Unit 356a Isle of Lewis PO Box 4...
- Page 18 ELECTROLUX SERVICE FORCE To contact your local Electrolux Service Force Centre telephone 08705 929 929 MIDLANDS LONDON & EAST ANGLIA SOUTH EAST BIRMINGHAM 66 Birch Road East, BECKENHAM 11a Gardener Ind Estate ASHFORD Unit 2 (M18) Wyrley Road Industrial (M79)
-
Page 19: Instructions For The Installer
Instructions for the Installer Technical Data Model Number: EK 5731 Appliance Class 2 sub class 1 and Class 1 APPLIANCE CATEGORY: 2H3+ APPLIANCE GAS SUPPLY: Natural gas G20 20mbar Oven Dimensions Top heating element 1,044 W Height 900 mm Bottom heating element... -
Page 20: Important Safety Requirements
Important Safety Requirements This appliance must be installed in accordance with Positioning the Cooker the Gas Safety (Installation and Use) Regulations (current addition) and the I.E.E. Wiring Regulations. Detailed recommendations are contained in the Caution: following British Standard Codes of Practice - B.S. 6172, B.S. -
Page 21: Installation
Installation 1. Positioning the Appliance (Fig. 1) Note A: The appliance is designed to be flush fitted with 2mm clearance at each side to allow for it to be pulled forward for cleaning etc. Note B: The hotplate side trims should be flush with the cabinets and must not be below. -
Page 22: Fitting The Stability Bracket
300 mm. WALL FACE BACK OF COOKER ENGAGEMENT EDGE FOR STABILITY BRACKET LEVELLING FEET BASE OF COOKER PENCIL LINE ON THE FLOOR 245 mm. SIDE VIEW PLAN VIEW OF THE COOKER OF THE COOKER FO 2434 Fig. 2 Dimensions are given in millimeters Fitting the Stability Bracket Connecting to Gas (Not supplied) -
Page 23: Electrical Connections
Electrical connections Any electrical work required to install this Permanent Connection In the case of a permanent connection, it is necessary cooker should be carried out by a qualified that you install a double pole switch between the electrician or competent person, in cooker and the electricity supply (mains), with a accordance with the current regulations. -
Page 24: Commissioning
Commissioning When the hob has been fully installed it will be necessary to check the minimum flame setting. To do this, follow the procedure below. - Turn the gas tap to the MAX position and ignite. - Set the gas tap to the MIN flame position then turn the control knob from MIN to MAX several times. -
Page 25: Conversion From Natural To Lpg Gas
Conversion from Natural to LPG Gas IMPORTANT The replacement/conversion of the gas hob should only be undertaken by a CORGI registered engineer. It is important to note that this model is designed for use with natural gas but can be converted for use with butane or propane gas providing the correct injectors are fitted.