Using The Food Sensor/Probe - Electrolux EVE915 Installation & User Manual

USING THE FOOD SENSOR/PROBE

The Food Sensor/Probe measures the core temperature
of the food. When the food reaches the desired set core
temperature, the oven turns off. The Food Sensor/Probe
has a core temperature range of 50-99°C.
There are two temperatures to set:
• The oven temperature
• The core temperature of the food
WARNING
Only use the Food Sensor/probe supplied or the
correct replacement parts.
NOTE: Food must be completely defrosted when inserting
the Food Sensor/probe. If the food is too cold, the Food
Sensor/probe function will not work.
Put the plug of the Food Sensor/probe into the socket on
the top right hand corner of the front frame. Ensure the
plug is fully inserted into the socket.
ALL FOOD SENSOR/PROBE MODELS
1. Turn on the oven.
2. Set a heating function and, if necessary, the oven
temperature.
3. Insert the Food Sensor/probe.
4. Plug the Food Sensor/probe into the socket at the
front of the oven. The display shows the current
temperature of the Food Sensor/probe.
5. Press to set the core temperature of the
Sensor/probe.
22˚C
Target Temperature
70˚C
71
6. Press to set the preferred option:
• Sound alarm – when the food reaches the core
temperature, the signal sounds.
• Sound alarm and stop cooking – when food
reaches the core temperature, the signal
sounds and the oven stops.
7. Select the option and repeatedly press:
the main screen.
8. Press: When food reaches the set temperature,
the signal sounds. You can choose to stop or to
continue cooking to make sure the food is well done.
9. Remove the Food Sensor/probe plug from the
socket and remove the dish from the oven.
WARNING
There is a risk of burns as the Food Sensor/Probe
becomes hot. Be careful when you unplug it and
remove it from the food.
Take a shortcut!
Meat
For large pieces of meat, insert the tip of the Food Sensor/
probe into the centre of the meat, with at least 75% of the
sensor/probe inserted into the meat.
Fish
For best results, place the whole fish onto the wire rack
and prop it up in the swimming position (i.e. using half
a potato or onion). Alternatively the fish can be laid flat.
Insert the Food Sensor/probe behind the head with at least
75% of the Sensor/probe inserted into the fish towards the
bones in the middle of the fish.
33
to go to