Cleaning Your Appliance With Pyrolytic Cleaning - Electrolux EVE915 Installation & User Manual

CLEANING YOUR APPLIANCE WITH PYROLYTIC CLEANING

Cleaning Reminder
After a recommended period of time the oven will remind
you to clean the oven. Once this period of time has
elapsed, when turning the oven off you will get a message
"TIME TO CLEAN YOUR OVEN". Press the on/off button
to clear the message and run the Pyrolytic cycle. After
the Pyrolytic cycle has finished, the cleaning reminder will
reset. The "Cleaning Reminder" setting can be enabled/
disabled in the settings menu.
Alternatively while the "TIME TO CLEAN YOUR OVEN"
message is displayed, you can press the "ok" button and
you will get the option to "REMIND ME AGAIN".
Pyrolytic cleaning of the oven cavity
The oven has the Pyrolytic self-cleaning function, it
cleans by burning off the spatters and accumulated
dirt and grease from the oven liner, at high temperature.
This process produces ash which can then be wiped
out of the oven cavity.
Pyrolytic cleaning will not remove limestone residue
left in the cavity well when water evaporates. It is
recommended that the residue is cleaned prior to
conducting Pyrolytic cleaning cycles. See 'Cleaning
the cavity well' on this page.
WARNING!
During the pyrolytic cleaning process the oven
becomes extremely hot.
DO NOT use Hob during Pyrolytic cleaning
• Please keep small children at a safe distance.
• Never clean non-stick baking trays and tins in the
oven during the pyrolytic cycle. High temperatures
damage the non-stick coating and poisonous gas is
released.
• To prevent damage, do not use acids, sprays or
similar cleaning agents.
CAUTION!
• During pyrolytic cleaning the air outlet exhaust
above the door must be kept clear of any
obstruction (e.g. bulky tea towels).
• Do not use your oven to clean miscellaneous
items (e.g. cookware).
WARNING!
Before carrying out the Pyrolytic function
1 All accessories must be removed from the
oven, including shelves, trays and side racks.
2 Clean large deposits, spills or grease from
the oven cavity.
3 Clean limestone residue from the cavity well.
4 Choose your Pyrolytic cleaning cycle from
the following:
Submenu Application
Quick Duration: 1 hour 30 minutes
Normal Duration: 2 hours
Intense Duration: 2 hours 30 minutes
NOTE: Duration includes heat-up time, excludes cool-
down time.
Light clean
This is an energy saving cycle that can be used on a
regular basis if the oven is lightly soiled. Possibly after
every 2nd or 3rd roast.
Medium clean
Use this as the regular cycle about once every 2-3
months.
Heavy clean
When the oven is very dirty it may need a longer cycle to
clean it thoroughly. This cycle will clean the dirtiest of ovens.
Food Probe
Clean the Food Probe after each use and let it dry. Use
a soft cloth with warm water and a cleaning agent. Only
clean the probe end and not the plug.
Cleaning the cavity well
The cleaning procedure removes limestone residue from
the cavity well after cooking with steam.
WARNING!
Perform the cleaning procedure at least every
5-10 Bake + Steam cooking cycles.
1 Mix 200ml of tap water with 150ml of white
vinegar and put the mix in the cavity well.
2 Let the water and vinegar mix dissolve the
limestone residue at the ambient temperature
for 45 minutes.
3 Remove the water and vinegar mix with a soft
cloth and clean the cavity with warm water and
a soft cloth.
NOTE: Pyrolytic cleaning cycle does not clean left over
salts from evaporation. Please use the following procedure
to clean the cavity well.
The oven should be reasonably dry before using the
Pyrolytic clean function.
NOTE: Side racks and slides do not need to be removed to
run the pyrolytic function.
61