Insignia NS-OCP3 Quick Setup Manual

QUICK SETUP GUIDE
Ergonomic
Mesh Office Chair
NS-OCP3

PACKAGE CONTENTS

Wheels (5) Base (1) Center support Seat bottom (1) Arms (2)
Chair back (1)
post (1)
M6 × 25 mm M8 × 20 mm M5 × 10 mm M6 × 20 mm Cover Allen Allen wrench for
screw (6) screw (4) screw (1) screw (1) plate (1) wrench (1) M5 × 10 mm (J)
screw (1)

FEATURES

• Adjustable seat, armrests, and headrest fit your body's specific needs
• Swivel and tilt mechanism lets you customize the chair to your ideal position
• Breathable mesh design grants a modern, stylish look
• Reinforced lumbar support provides maximum comfort
• Sturdy 5-pointed base with wheels makes it easy to move around your workspace
Before using your new product, please read these instructions to prevent any damage.

ASSEMBLING YOUR CHAIR

1 Turn the base (B) upside down on carpet or a soft towel.
2 Insert the wheel (A) posts into the holes at the ends of the base arms until they click into place.
3 Turn the base right side up, then insert the bottom of the center support post (C) into the hole in the center
of the base.
Head
support (1)
Quick Setup
Guide
4 Align the screw holes in the left arm (F) with the holes in the left rear of the chair back (E) and attach it
with three M6 × 25 mm screws (H). Tighten with the Allen wrench (M). Do the same for the right arm (F).
5 With the seat supported, align the holes in the bottom of the chair back (E) with the bracket on the seat
bottom (D). Make sure that the arms (F) are toward the front of the chair seat. Attach the chair back (E)
with four M8 × 20 mm screws (I). Tighten with the Allen wrench (M).
6 Attach the cover plate (L) to the seat bottom with one M5 × 10 mm screw (J). Tighten with the Allen
wrench (N).
7 Turn the chair back/seat assembly right side up and attach it to the chair base by guiding the top of the
center support post (C) into the hole in the bottom of the seat bottom (D). Attach the head support (G)
to the chair back (E) with an M6 × 20 mm screw (K). Tighten with an Allen wrench (M).
Correct
Incorrect
CAUTION: Make sure that the chair back/seat assembly and chair base are securely connected and that all bolts
are tightened before sitting in the chair.