Option 3 Unit Id; Option 4 Network Parameters - Intermec 600 Series 600 User Manual

DOS Utilities Program

Option 3 UNIT ID

If you select this option, the "Change Unit ID" pop-up menu
appears:
Enter up to eight characters to change the Unit ID. Use the
[ SP] key to backspace and use the [CLR] to restore the
previous ID. Press the [ENT] key to save the new ID and
return to the "Communications Settings" menu. Press the
[ALT + 4] keys to reset the ID to factory default. Press
[ESC] to exit this pop-up menu.

Option 4 NETWORK PARAMETERS

Network Parameters appears as Option 4 when Option 2.
COMM SETTINGS is set to one of these three NETWORK
options: NRINET, TFTP, or NOVELL NETWARE.
B-22 600 Series Industrial Mobile Computer User's Guide
CHANGE UNIT ID
UNIT ID 2233233
WORKGROUP
600IPL
[ALT + 4] RESET
FACTORY
[ESC]QUIT
APPENDIX B