Option 4 Modem Parameters - Intermec 600 Series 600 User Manual

DOS Utilities Program
NETWORK PARAMETERS with NOVELL NETWARE
If you select this option and Option 2. COMM SETTINGS
is set to NOVELL NETWARE, this frame type drop-down
list appears:
Press the number of a frame type, or press the Y or B keys
to scroll through the list and press the [ENT] key to enter.
Press the [ESC] key to exit this drop-down list without
changing the frame type.

Option 4 MODEM PARAMETERS

Modem Parameters appears as Option 4 when Option 2.
COMM SETTINGS is set to MODEM/DIRECT.
If you select this option, the "Modem Parameters" pop-up
menu appears.
Press the number of a modem parameters option, or press
the Y or B keys to scroll through the list, then press the
[ENT] button to enter.
Suboption 1 MODEM TYPE
If you select this suboption, a drop-down list appears with
supported modem types. Press the Y or B keys to scroll
through the list, then press the [ENT] button to enter.
B-24 600 Series Industrial Mobile Computer User's Guide
1. 802.2
2. ETHERNET II
3. 802.3 RAW
4. 802.2 W/ SNAP
MODEM PARAMETERS
1. MODEM TYPE
NM2400/NM2400A
2. PROTOCOL TTY
3. BPS RATE 2400
4. DATA FORMAT 8N1
5. AUTO ANSWER ESC
[ESC]DONE
APPENDIX B