Table of Contents
Advertisement
SECTION 2
The below column on the left shows the lines of code altered
to allow panning. The right column on the right shows the
default changed for to enable the panning to occur.
Setting Changed
;-- non-panning configuration
;FrameSeq=0xa000
;HWModule=SC4_2BPP.d11
;DisplayOrientation=1
;DisplayColumns=240
;DisplayRow=320
;Panning=0
;PanTrack=0
;PanAbsolute=0
6. Save the changes to System.ini file.
7. Copy file from the external ATA or pc via HyperTer-
After you are finished making changes, go back and change
the default back to non-panning. To do this, of course, you
reverse the process both for the non--panning and panning
display configurations.
Downloading from Host Computer
1. Install your computer into a dock.
2. Download program into your computer.
There are several ways to download your application.
EXAMPLE:
You can load the program onto the CompactFlash card, install it into
your computer, and select the program from the directory.
Non- Panning Setting Changed
minal to boot ATA. You have to reboot for the new set-
tings to take effect.
600 Series Industrial Mobile Computer User's Guide
Operation
Panning
;-- panning configuration
FrameSeq=0xa000
HWModule=SC4_2BPP.d11
DisplayOrientation=1
DisplayColumns=640
DisplayRows=480
Panning=1
PanTrack=1
PanAbsolute=1
2-11
Advertisement
Table of Contents
