What You Can Configure Through DCB.INI (continued)
What You Want To Do
Display stdout.
Cause a screen to be transmitted when input is received from a scanner.
Turn on a special screen for use of logical names or IP addresses.
Choose whether pressing Esc calls the previous screen.
Testing Your Application
Setting Up the Runtime Environment
Data Collection Browser User's Guide
1 Verify that the correct home page appears for each device.
2 Using the simulator, run the application. Make sure that the data the
web server returns is the data you expect.
3 Using the simulator, test the application for unexpected user input or
keystrokes. Verify that appropriate error messages appear.
To set up the runtime environment for the Intermec Application Server, see
the documentation that came with your Intermec Application Server. To set
up the runtime environment for the software-only dcBrowser gateway, see
the online help.
Chapter 2 — Developing and Testing Your Application
Parameter You Change in INI File
visible(stdout)
TRANSMIT_ON_SCAN
UDP_WTP_ALLOWED
IGNORE_ESCAPE
35